# Attributes

Description:
Type of port connections user is allowed to make (Async ISDN PPTP)


Description:
Password of user requesting authentication


Description:
Password of CHAP user requesting authentication


Description:
IP address of the NAS originating the request (IAS only)


Description:
Physical port number of the NAS originating the request


Description:
Framed address to be configured for user


Description:
Name of filter list for user requesting authentication


Description:
Maximum Transmission Unit to be configured for user


Description:
IP address of host to which user should be connected


Description:
TCP port to which user should be connected


Description:
Message to be displayed to user when authentication request is accepted or rejected


Description:
Routing information to be configured on the NAS for user


Description:
IPX network number to be configured on the NAS for user


Description:
Attribute sent to client in an Access-Challenge packet


Description:
Used to support proprietary NAS features


Description:
Length of time (in seconds) before session is terminated


Description:
Length of idle time (in seconds) before sesson is terminated


Description:
Action NAS should take when service is completed


Description:
String identifying the NAS originating the request (IAS only)


Description:
String sent by proxy server when forwarding an Access-Request packet


Description:
Host with which user is to be connected by LAT


Description:
Node with which user is to be connected by LAT


Description:
LAT group codes for which user is authorized


Description:
AppleTalk network number for the serial link to user (only when user is router)


Description:
AppleTalk network number the NAS must probe to allocate user's AppleTalk node


Description:
Specifies whether Accounting packet starts or stops a bridging routing or terminal server session


Description:
Length of time (in seconds) for which the NAS has been sending the same accounting packet


Description:
Number of octets received during the session


Description:
Number of octets sent during the session


Description:
Unique numeric string identifying the server session


Description:
Specifies which server authenticated an incoming call


Description:
Length of time (in seconds) for which the session has been logged in


Description:
Number of packets received during the session


Description:
Number of packets sent during the session


Description:
Unique numeric string identifying the multilink session


Description:
Number of times the Acct-Input-Octets counter has wrapped around 2^32


Description:
Number of times the Acct-Output-Octets counter has wrapped around 2^32


Description:
This attribute is included in an Accounting-Request packet to record the time that this event occured on the NAS in seconds since January 1 1970 00 00 UTC


Description:
Type of physical port used by the NAS originating the request


Description:
Maximum number of ports NAS provides to user


Description:
Port with which user is to be connected by LAT


Description:
Transport medium to use when creating a tunnel for protocols (such as L2TP) that can operate over multiple transports


Description:
IP address of the initiator end of the tunnel


Description:
IP address of the server end of the tunnel


Description:
Password for authenticating to a remote server


Description:
User Password (AppleTalk Remote Access Protocol only)


Description:
Information the NAS should send to user in the ARAP feature flags packet (AppleTalk Remote Access Protocol only)


Description:
Indicate how the ARAP zone list for user should be used (AppleTalk Remote Access Protocol only)


Description:
ARAP Security Module to be used in an Access-Challenge packet (AppleTalk Remote Access Protocol only)


Description:
Actual security module challenge or response (AppleTalk Remote Access Protocol only)


Description:
Number of times user can try to be authenticated before NAS terminates connection


Description:
Specifies to the NAS whether or not it should echo user's response as it is entered


Description:
Indicate the nature of user's connection


Description:
Indicate a type of user profile to be used (sent from a RADIUS proxy server to a RADIUS proxy client in an Access-Accept packet; should not be sent to a NAS)


Description:
Opaquely encodes Extended Access Protocol information to allow dial-in users to use EAP to authenticate without having to implement EAP on the NAS


Description:
Can be used to sign Access-Requests to prevent dictionary attacks on CHAP ARAP or EAP authentication methods


Description:
Group ID for a particular tunneled session


Description:
Tunnel to which a session is to be assigned


Description:
Relative preference assigned to each tunnel when more than one set of tunneling attributes is returned to the tunnel initiator


Description:
Length of interval (in seconds) between each interim update the NAS sends


Description:
Name used by the tunnel initiator during the authentication phase of tunnel establishment


Description:
Name used by the tunnel terminator during the authentication phase of tunnel establishment


Description:
Delay (in seconds) before the Ascend NAS calls user back


Description:
Port number for the modem the Ascend NAS is using


Description:
Slot number for the modem the Ascend NAS is using


Description:
Shelf number for the modem the Ascend NAS is using


Description:
Maximum time (in minutes) before the Ascend NAS terminates a connection


Description:
Secondary DNS name used by the Ascend NAS


Description:
IP address of server on which user has an account


Description:
Shared secret of server on which user has an account


Description:
Specifies when user is a multicast client of the Ascend NAS


Description:
Time (in seconds) the Ascend NAS waits before accepting another packet from a multicast client


Description:
Subnet mask in use for the local numbered interface


Description:
IP address of the numbered interface at the remote end of a link


Description:
PVC (Permanent Virtual Connection) for which user profile is an endpoint


Description:
Specifies whether the frame relay link comes up automatically in a Frame Relay Profile


Description:
Associates a group of nailed-up channels with the Frame Relay Profile


Description:
Type of frame relay connection used by the Frame Relay Profile


Description:
Link management protocol used between the Ascend NAS and the frame relay switch in a Frame Relay Profile


Description:
Interval (in seconds) between Ascend NAS requests for Full Status Reports in a Frame Relay Profile


Description:
Number of errors during Ascend-FR-DCE-N393-monitored events that cause the network side to declare user side's procedures inactive


Description:
Number of errors during Ascend-FR-DTE-N393-monitored events that cause user side to declare the network side's procedures inactive


Description:
DCE-monitored event count. A link is always considered active if the value of Ascend-FR-DCE-N393 is not reached


Description:
DTE-monitored event count. A link is always considered active if the value of Ascend-FR-DTE-N393 is not reached


Description:
The Link Integrity Verification polling timer


Description:
Time the unit should wait between Status Inquiry messages


Description:
Length of time (in seconds) that a terminal server connection must be idle before the Ascend NAS disconnects the session


Description:
Specifies whether the Ascend NAS uses a terminal server idle timer and if so whether both user and host must be idle before the Ascend NAS disconnects the session


Description:
Method the Ascend NAS uses to monitor traffic on a Multilink Protocol Plus (MP+) call


Description:
Initial number of channels an Ascend NAS sets up when originating certain calls


Description:
Minimum number of channels used in a Multilink Protocol Plus (MP+) call


Description:
Used to configure a static IPX route in a user's file entry (Ascend only)


Description:
Specifies whether NAS initiates FT1-AIM or FT1-B&O calls or whether it waits for a remote end to initiate such calls


Description:
Profile name of a backup profile for a nailed-up link


Description:
Data Link Connection Indicator that identifies the Connection Profile to the frame relay switch


Description:
Name of the Frame Relay Profile for this connection


Description:
Password of the incoming caller on an AppleTalk Remote Access connection


Description:
IP address of home agent in ATMP operation


Description:
Password sent by foreign agent to home agent in ATMP operation


Description:
Connection Profile through which home agent sends packets received by mobile node in ATMP operation


Description:
UDP port foreign agent to send messages to home agent


Description:
ID of a Multilink bundle (multichannel MP or MP+ call)


Description:
Number of sessions remaining in a Multilink bundle (multichannel MP or MP+ call) as reported in an Accounting Stop packet


Description:
Destination IP address of the first packed received in an authenticated connection


Description:
Number of input octets received before authentication


Description:
Number of output octets sent before authentication


Description:
Number of input packets received before authentication


Description:
Number of output packets sent before authentication


Description:
Length of time (in seconds) before session is terminated by Ascend NAS


Description:
State of connection before it is terminated


Description:
Data rate of connection (in bits per second)


Description:
Length of time (in seconds) between when a call connects and when authentication is complete


Description:
Length of time (in minutes) a cached token can remain alive between authentications if a call is idle (Ascend NAS only)


Description:
Method RADIUS uses to handle passwords received from users who are required to use hand-held security card server


Description:
Specifies whether additional authentication is required for CLID-authenticated calls (Ascend NAS only)


Description:
Number of active sessions of the class specified in the Class attribute


Description:
Ascend NAS login name for PPP authentication


Description:
Lifetime of a cached token or hand-held security card authentication (Ascend NAS only)


Description:
Prompt for user input in the terminal server menu interface (Ascend NAS only)


Description:
Single menu item for an Ascend NAS user profile


Description:
The number of days for which user's password is valid (Ascend NAS only)


Description:
IP address to which Ascend NAS redirects packets from user


Description:
Specifies that Ascend PPP code must not use slot compression when sending VJ-compressed packets


Description:
Specifies that Ascend PPP code must use 0x0037 value for VJ compression type


Description:
Async control character map that Ascend PPP code must use during the PPP session (Ascend NAS only)


Description:
Additional prompt for user input after login and password prompts (Ascend NAS only)


Description:
Specifies that password is encrypted when passed between RADIUS server and Ascend NAS. Used in place of Ascend-Send-Passwd.


Description:
Value received from dial-in user used to verify encrypted password


Description:
Defines an IP address pool for dynamic assignment


Description:
Index number of the IP address pool that user must use for dynamic address assignment


Description:
Specifies whether Connection Profile uses frame relay redirect mode (Ascend NAS only)


Description:
DLCI (Data Link Connection Indicator) for user profile in a frame relay redirect connection


Description:
Method Ascend NAS uses to handle NCP watchdog requests during IPX bridging


Description:
Length of time (in minutes) for which an Ascend NAS responds to NCP watchdog requests


Description:
IPX address used by NAS when connecting to IPX routers requiring numbered interfaces


Description:
Phone number the Ascend NAS dials to reach the bridge router or node at the remote end of the link


Description:
Specifies that protocol-independent bridging should be used for current connection


Description:
Protocol to use for name-password authentication following CLID authentication


Description:
Password to be sent by IAS to the remote end of a connection on outgoing calls


Description:
Percentage of bandwidth use at which the Ascend NAS adds or subtracts bandwidth.


Description:
Maximum number of channels allowed on an MP+ call


Description:
Number of channels the Ascend NAS adds when bandwidth changes either manually or automatically during a call


Description:
Length of time (in seconds) the Ascend NAS uses as a sample for calculating average line utilization (ALU) of transmitted data


Description:
The Dynamic Bandwidth Allocation (DBA) algorithm to use for calculating average line utilization (ALU) of transmitted data


Description:
Time in seconds by which average line utilization for transmitted data must exceed the threshold indicated by the Ascend-Target-Util attribute before the Ascend NAS adds bandwidth


Description:
Time that average line use for transmitted data must fall below the threshold indicated by the Ascend-Target-Util attribute before the Ascend NAS removes bandwidth from a session


Description:
Length of time (in seconds) the Ascend NAS waits before clearing a call when a session is inactive


Description:
Number of idle seconds the Ascend NAS waits before using one of the channels of an idle link for a new call


Description:
Enables or disables callback on the Ascend NAS


Description:
Specifies data service used by Ascend NAS


Description:
Specifies whether Ascend NAS uses only 56-KBps portion of a channel even if all 64 KBps are available


Description:
Billing number for charges incurred on the line


Description:
Specifies the T1 PRI service used by NAS


Description:
U.S Interexchange Carrier (IEC) you use for long distance calls over a T1 PRI line


Description:
Specifies a list of hosts to which a user can establish a Telnet session


Description:
IP address reporting to the calling unit during PPP IPCP negotiations


Description:
Percentage of bandwidth utilization below which the Ascend NAS clears a single-channel MP+ call


Description:
Framed address to be configured for user (for IAS internal use only)


Description:
Phone number to be used for callback (for IAS internal use only)


Description:
Phone number from which call originated (for IAS internal use only)


Description:
Routing information to be configured on the NAS for user (for IAS internal use only)


Description:
Maximum of number of sessions allowed in a single connection


Description:
Time periods and days of week during which user is allowed to connect


Description:
Authentication types permitted for a connection


Description:
EAP encryption modes permitted for a connection


Description:
Manufacturer of RADIUS proxy or NAS. (IAS only)


Description:
Port IAS uses to communicate with client


Description:
Authentication scheme used to verify user


Description:
Friendly name for the RADIUS client. (IAS only)


# Enumerators

Name:
802 (includes all 802 media plus Ethernet canonical format)


Name:
Ascend Tunnel Management Protocol (ATMP)


Name:
IP Authentication Header in the Tunnel-mode (AH)


Name:
IP Encapsulating Security Payload in the Tunnel-mode (ESP)


Name:
TCP Clear Quiet (suppresses any NAS-generated connect string)


Name:
ADSL-CAP - Asymmetric DSL Carrierless Amplitude Phase Modulation


Name:
ADSL-DMT - Asymmetric DSL Discrete Multi-Tone


